Руководство по эксплуатации даф 95 скачать

DAF 95XF. Manual - part 95.

When the coolant is hot, there is an overpressure in the cooling system. Carefully remove the filler cap to release the overpressure. Coolant is a noxious fluid. Avoid skin contact to prevent poisoning. In order to avoid damaging the engine block, do not top up the warm engine with cold coolant. Removal of the coolant filter 1. Place a tray beneath the filter to capture any escaping coolant. Remove the filler cap from the header tank.

Switch the shut-off valve (1) clockwise to the “C” position. Remove the coolant filter by turning it counter-clockwise. Installation of the coolant filter 1. Clean the sealing face of the coolant filter. Apply a small amount of coolant to the sealing ring of the coolant filter element. Fit the coolant filter until the sealing ring abuts. Then tighten the filter by hand. Switch shut-off valve (1) counter-clockwise to the “O” position.

Put the filler cap back on the header tank. Run the engine and check that the coolant filter has sealed correctly.